Support road.cc

Like this site? Help us to make it better.

forum
road.cc bike forum

Play in jockey wheels, replace?

by aKelly1305
Thu, Feb 09, 2017 08:48
7

I am servicing my race bike for the coming season. The guide pulley (upper jockey wheel) has some lateral play. Is this normal or should I replace? Thanks

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

7 comments

Avatar
aKelly1305 | 8 years ago
0 likes

Thanks for the replies, LBS says all good

Avatar
FMOAB | 8 years ago
0 likes

Lateral play in the top jockey wheel is a Shimano patented feature.  Does it make a difference?  Not that I've ever felt.

I don't remember Tacx Shimano replacements having this "feature" and I've never felt they gave inferior shifting.

Avatar
CXR94Di2 | 8 years ago
0 likes

The jockey wheel should be able to slide side ways a little. It must not tilt on the pivot, that would then indicate the bearing is worn.

Avatar
Simon E | 8 years ago
2 likes

There should be some play, especially the top one, as it helps the chain when moving across the cassette. Unless they are worn and the teeth are pointy just clean and regrease them and carry on.

After the first ride check you've tightened the bolt adequately. The one time I didn't the bolt on the lower one worked loose and the jockey wheel fell out. Idiot.

Avatar
madcarew | 8 years ago
0 likes

 A little lateral play (side to side of) less than 1 mm is ok (on shimano, don't know about other brands. On the bottom jockey wheel it is about 3mm built in. If your top one is more than 1mm then replace it.

Avatar
matthewn5 replied to madcarew | 7 years ago
0 likes

madcarew wrote:

 A little lateral play (side to side of) less than 1 mm is ok (on shimano, don't know about other brands. On the bottom jockey wheel it is about 3mm built in. If your top one is more than 1mm then replace it.

Don't you mean the top jockey wheel? Shimano upper jockey wheels are built with a soft lateral movement to make shifts smoother and less noticeable. If you want your Shimano setup to feel more positive, replacing the upper jockey wheel with one of those alloy aftermarket ones without lateral play makes a really noticeable difference, almost Campag-like.

The bottom jockey wheel doesn't need lateral play, because it's not forcing the chain across the sprockets in the cassette.

Avatar
StraelGuy | 8 years ago
0 likes

I've got a 10 speed 105 rear mech with about 2,600 miles on it on my desk in front of me (I upgraded to 11 speed). The top jockey wheels moves side to side a good 1mm and the lower one about half a millimetre so I guess some play is necessary.

Latest Comments