Support road.cc

Like this site? Help us to make it better.

Tyre pressure confusion

I put a set of continental GP urban 35mm tyres on my gravel bike for some comfortable road riding. All the tyre pressure calculators I've used suggested 45 - 50 psi as optimal for this tyre size based on total weight of 75kg , but the tyres themselves say min 65 psi. Any idea why the manufacturer min would be so high relative to the calculators?

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

4 comments

Avatar
pmkdlk | 8 min ago
0 likes

Thanks good to hear I'm not missing something. I'll stick with the 50 psi , no issues so far. There are a stack of cobbles where I live so not looking to go near 65 !

Avatar
Backladder | 3 hours ago
0 likes

That is a massive pressure for those conditions, I run 65 psi for 32mm tyres with 110kg all up weight and don't have a problem with pinch flats even on our rough roads. I would use the chart pressures which seem reasonable to me and ignore the manufacturer as they are probably assuming heavier all up weight and lack of maintenance.  

Avatar
Geoff Ingram replied to Backladder | 3 hours ago
0 likes

Completely agree. At 80kg or so all up 45psi is good for my gravel bike with 39mm tyres. And after a fair while, when it drops to 35 I put it up to 45 again. 65psi is for my bike with 28mm tyres.

Avatar
Hirsute | 4 hours ago
0 likes

Says it can go up to 85 psi. All I can think of is something about the tyre wall that needs a higher pressure but it is out of step with the charts as you say.

Latest Comments