Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Unboxing: Van Nicholas Skeiron disc-equipped titanium road bike launched

New titanium disc-equipped performance road bike launched

In our latest unboxing video we unveil the brand new Van Nicholas Skeiron, the Dutch titanium company's all-new disc-equipped performance road bike. 

Van Nicholas likes to name its bike models after winds, and this latest one derives its name from the Greek god of the Northwest wind. It would seem an apt name for a bike that the company says is intended to be a high-performance road bike.

To deliver the necessary performance expected of a bike of this style, the frame has been beefed up in key areas. An oversized down tube, press-fit bottom bracket, tapered head tube and tapered chainstays using hydroforming ramps up the stiffness of the frame. 

- Terrific titanium: 15 of the loveliest titanium road bikes we've ridden

Also helping in the battle against flex are the 12mm thru-axles at both ends and a full carbon fibre fork. The new frameset also uses the flat mount standard. To provide very clean aesthetics, all cables and hoses are internally routed, with a very neat entry port on the front of the head tube. It’s Di2 compatible as well. 

Fear not if all this talk of frame stiffness is putting you off, the company assures us it has managed to retain the smoothness that the frame material is famed for. It has used very small diameter seat stays with no brake bridge and a 27.2mm titanium seatpost to offer a little extra ride comfort.

“Our main goal was innovation by integration,” explains Ralph Moorman, General Manager of Van Nicholas, “so we designed the Skeiron with integrated cable and hose routing; clean and unique for a titanium frame.” 

“In keeping with the integrated concept, the front fork has also been designed to accommodate the front brake hose and blend seamlessly with the frame – a neat ergonomic touch that also enhances the bike’s aerodynamic performance,” he adds. 

It's worth adding that while Van Nicholas claims the new Skeiron has "unique" integrated cable and hose routing, it's not actually that unique; the new Kinesis Tripster ATR V2 and J.Laverack R.Jack are two titanium frames with disc brakes that feature internal routing for the gears and brakes. 

- Everything you need to know about disc brakes

The new Skeiron will be available direct from Van Nicholas or from Van Nicholas dealers in August and cost €2,099 for the frame and fork, or total builds kicking of at €3,599 with a Shimano 105 groupset. The build featured in our unboxing video spares no expense, with Ultegra Di2 and FFWD carbon clincher wheels coming in at just shy of €7,000. Choose from six frame sizes from 48 to 64cm.  More at www.vannicholas.com

Stay tuned for the full review soon. You can watch more unboxing videos on our YouTube channel right here.

David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Add new comment

9 comments

Avatar
dodgy | 7 years ago
1 like

7000 euros...

Avatar
Ad Hynkel | 7 years ago
0 likes

I think the "unique" aspect of the integrated cable and hose routing is that it goes in via the headtube and not the downtube. Have to say I have not seen that on the either of the above mentioned competitors. Looks like a neater solution but must be a PITA to manufacture.

Avatar
amazon22 replied to Ad Hynkel | 7 years ago
0 likes

Ad Hynkel wrote:

I think the "unique" aspect of the integrated cable and hose routing is that it goes in via the headtube and not the downtube. Have to say I have not seen that on the either of the above mentioned competitors. Looks like a neater solution but must be a PITA to manufacture.

We're all different - I thinks it looks butt ugly and upsets the symetry of the headtube.

Press fit - a fail from me.

Avatar
StraelGuy | 7 years ago
5 likes

I lost all interest as soon as I read 'press-fit bottom bracket'. On a ti frame, seriously?!

Avatar
graybags | 7 years ago
0 likes

Intergrated hosing and cabling unique, I don't think so !

Avatar
amazon22 replied to graybags | 7 years ago
0 likes

graybags wrote:

Intergrated hosing and cabling unique, I don't think so !

What make is that? 

Avatar
graybags replied to amazon22 | 7 years ago
0 likes

It's a custom build, fabrication was by Waltly Titanium in China. Sadly the chap in the UK who specced and sourced it and all the components is now concentrating on his day job. If you're confident enough, Walty will deal with individual purchasers and a TI frame will set you back around £700/800 plus carriage. You'll get a technical drawing as attached to make sure everything is as ordered.

 

 

amazon22 wrote:

graybags wrote:

Intergrated hosing and cabling unique, I don't think so !

What make is that? 

Avatar
amazon22 replied to graybags | 7 years ago
0 likes

graybags]</p>

<p>It's a custom build, fabrication was by Waltly Titanium in China. Sadly the chap in the UK who specced and sourced it and all the components is now concentrating on his day job. If you're confident enough, Walty will deal with individual purchasers and a TI frame will set you back around £700/800 plus carriage. You'll get a technical drawing as attached to make sure everything is as ordered.</p>

<p>[quote=amazon22 wrote:

What make is that? 

Thanks - interesting but I wouldn't feel confident dealing direct. 

Avatar
Kristi_K replied to graybags | 7 years ago
0 likes

graybags wrote:

It's a custom build, fabrication was by Waltly Titanium in China. Sadly the chap in the UK who specced and sourced it and all the components is now concentrating on his day job. If you're confident enough, Walty will deal with individual purchasers and a TI frame will set you back around £700/800 plus carriage. You'll get a technical drawing as attached to make sure everything is as ordered.

 

 

amazon22 wrote:

graybags wrote:

Intergrated hosing and cabling unique, I don't think so !

What make is that? 

In you pdf drawing is not the Skeiron frame drawing. It is not even close  1

Waltly will not sell you the Skeiron frame. They may produce a custom Ti frame for you but not the Skeiron one.

Latest Comments