Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Dan Craven’s Saffron stainless steel race bike for the Commonwealth Games

Check out Dan Craven's custom Saffron steel race bike ahead of the Commonwealth Games road race tomorrow

This is Dan Craven’s brand new race bike, and unlike the majority of race bikes that are made from carbon fibre, this one is made from steel. He’ll be riding it at the Commonwealth Games tomorrow representing Namibia and afterwards, it and he will be on display at the Bespoked UK Handbuilt Bicycle Show next weekend.

Bespoked 2018 preview - Saffron, Campagnolo 12spd, Chris King, Shand, Filament and much more to see next weekend

dan_craven_saffron7.jpg

That Dan is choosing a steel bike over a carbon one is no surprise. His preference for steel bikes first came to light back in 2010 when he was racing for the Rapha Condor team. He worked with the Condor, the London-based bike shop and bicycle brand on developing a steel bike that had all the performance necessary to not hold him back in a peloton full of carbon bikes.

dan_craven_saffron4.jpg

His prototype, dubbed ‘Steely’ proceeded the eventual production bike that went on to be called the Super Acciaio. The bike was used by Dan during the full UK season of road and crit races and he rode it to victory in the King of the Mountains competition in the Tropicale Amissa Bongo race in Gabon.

Since then the idea of performance steel race bikes took on a new lease of life. The Super Acciaio was the first bike in a small movement that saw other brands attempt to put steel bikes back in the peloton. Genesis Bikes also enjoyed quite a bit of success when its team began racing the stainless steel Volare, a bike that was developed specifically for the demands of racing.

dan_craven_saffron_bike2.jpg

Now there’s a growing number of small-scale framebuilders that by utilising the latest tube developments from Columbus and Reynolds are building bikes that challenge the notion that you have to go carbon if you want a light, stiff and race-ready bike. As a visit to Bespoked next week will show you.

Back to Dan’s new bike, and it’s built from a Columbus XCr stainless steel tubeset, the tubes TIG welded together and no finished applied to save weight. The fork is a Columbus Futura with a Chris King Inset7 headset, and the Campagnolo Super Record groupset is one of the lightest money can buy. Add a pair of Campagnolo Bora Ultra wheels, Schwalbe One tyres and Fabric ALM saddle, and you have a very nice bike indeed.

dan_craven_saffron_bike3.jpg

The planning of this bike began last February and went ahead in March, with the objective to make a race-ready stainless steel bike with a target weight of 7kg to suit the mostly flat Commonwealth Games course. Saffron says details key to this bike include a high bottom bracket and steep head angle to provide a lively and agile handling.

dan_craven_saffron_bike4.jpg

Describing the handling after his first shakedown ride upon arrival in Australia ahead of the Commonwealth Games, Dan had this to say:

“The geometry Matt [Sowter; Saffron founder] and I decided to use makes this bike nippy – and oh so much fun. Unlike other bikes I have ridden which, might be a bit “easier” to handle – but are therefore a bit… well… boring. Of course, being my first stainless steel bike – I cannot, in all honesty, say how much that has to do with the geometry and how much has to do with the material. Or as I suspect – it’s a combination of both. After all, that's why we chose to build with this material in this way.

As we mentioned up top, Dan has always had a soft-spot for steel race bikes. He adds:

dan_craven_saffron2.jpg

“I’ve always been a huge fan of chromed or stainless bikes. Shiny chain stays especially. So having a whole bike built just the way I want it makes me seriously happy. The Breezer dropouts are my favourite (seriously – if you prefer a different type of dropout I do not understand you). The straight, chunky head tube just makes for such a clean and solid look that I really think is timeless and classic – without being in an old-school way. In my eyes, all of the tube diameters are in perfect relation to each other (something that often ruins otherwise perfect steel bikes in my opinion). All topped off with the subtle sandblasted and shiny look. Once again, classy, subtle and just utterly beautiful!”

Good luck tomorrow Dan!

- 18 of the best steel road bikes and frames — great rides from cycling's traditional material

David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Add new comment

12 comments

Avatar
don simon fbpe | 6 years ago
3 likes

All said and done, that's a fine looking bike.

Avatar
Langsam | 6 years ago
3 likes

Nice bike.

looking at the course however I would have thought an aero road frame was more appropriate.

best of luck to the bloke.

 

::edit:: looks like Steel(e) won, so a partial victory of sorts!

Avatar
davel | 6 years ago
0 likes

His girlfriend should've taken over his twitter account during the race again. Pretty funny during the Olympics (I checked, no in-race tweets this time).

Avatar
recurs | 6 years ago
0 likes

While 6/7ths of my bike collection is dedicated to all things steel, I really just fail to see the point when there's so much carbon fiber involved in this build.

 

Avatar
fukawitribe replied to recurs | 6 years ago
2 likes

recurs wrote:

While 6/7ths of my bike collection is dedicated to all things steel, I really just fail to see the point when there's so much carbon fiber involved in this build.

You do, don't you ? I would imagine they wanted to build a steel framed race bike instead of complying with a random member of the publics arbitrary requirement of a minimum amount of steel before it's "real". I think they've done a cracking job myself, and looks absolutely stunning to me. 

Avatar
yupiteru | 6 years ago
2 likes

Nice bike, much better than all this overpriced plastic nonsense !

Avatar
BehindTheBikesheds replied to yupiteru | 6 years ago
1 like

yupiteru wrote:

Nice bike, much better than all this overpriced plastic nonsense !

Overpriced?

My ex continental team framset was £430 new direct from the team sponsor/manufacturers importer, many decent spec carbon frames are a lot less than a R953/Columbus XCR etc handbuilt by an artisan builder.

Avatar
madcarew | 6 years ago
1 like

Cool  that he is able to take his passion for steel to the highest level. I'll enjoy watching him today, and wish him the best of luck claiming bronze behind Jack Bauer and Sam Gaze  1

Avatar
StraelGuy | 6 years ago
1 like

Breezer dropouts, like this:

 

http://www.micrak12.com/web_links/breezer.JPG

 

Very practical and stylish.

Avatar
Tom_in_MN | 6 years ago
0 likes

He calls out the dropouts and yet there is no picture of them. Be nice to see what is so special about them.

Avatar
StraelGuy | 6 years ago
4 likes

He'll win because all those nancy boy carbon bikes will be too afraid to go past it smiley.

Avatar
mike the bike | 6 years ago
4 likes

 

I too ride, and love, steel and so I wish him the best of luck.  But he will fail to land the top spot of course, that is inevitable.  

(If my prediction comes true I shall be a wise and perceptive man.  If it proves false, and he wins, it will fully justify my faith in the material.  It's a win-win.)  

Latest Comments