Support road.cc

Like this site? Help us to make it better.

Play in thru axle

Hi all,

My DT Swiss (R32 Spline DB) wheels have developed a bit of play in the rear wheel. The rim is able to rock about 1mm to either side, the movement is probably only 0.25mm either side at the hub.

What could cause this and are there any suggested fixes (I think a trip to the LBS may be in order!).

I've made sure the thru axle is correctly done up and that the dropout is tight - the play isnt bad enough to make the disc rotor isn't rubbing on the pads.

Cheers.

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

5 comments

Avatar
StraelGuy | 6 years ago
0 likes

How many miles on the wheels?

Avatar
Canyon48 replied to StraelGuy | 6 years ago
0 likes

StraelGuy wrote:

How many miles on the wheels?

2000, front wheel is fine.

I took off the freehub and both end caps, I can't see any play in the axle, but I can feel very slight movement.

Avatar
Canyon48 | 6 years ago
0 likes

The cassette and freehub are solid. I took the wheel out and could move the axle by about 0.5mm.

Next job is to take off the freehub and see if anything wasn't put back together correctly previously.

Avatar
StraelGuy | 6 years ago
0 likes

I found that in my front wheel (QR) the other day. Turns out the bearings were shot.

Avatar
VeloUSA | 6 years ago
0 likes

Check that your cassette lockring hasn't loosened by rocking the cassette side to side. It should have zero play.

Latest Comments