Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Bespoked Bristol: Best of British - Donhou, Brian Rourke, Ted James & the Rapha Continental

Some of our favourite British built bikes from Bespoked Bristol 2012

Bespoked Bristol is over, you say? Not on road.cc it isn't. Certainly not when we haven't yet talked about some of the British bikes that really floated our boat at last week's show from the likes of Brian Rourke, Ted James, and Tom Donhou.

Rourke and Donhou not only had their own stands but also built bikes for Rapha Continental UK - so more on them (and that) later. First let's look at a couple of the bikes Ted James had on display at Bespoked. Like Ricky Feather, Ted James made his name as a BMX rider, and then latterly as one of the best known riders on the London fixed gear scene known by many as SuperTed - he was until fairly recently sponsored by Charge and appeared in a fair few of their riding videos.

As well as making and repairing bikes, James has also started making his own hubs and headsets using his own machine tools – the story of how he found his Dean, Smith, & Grace lathe would make a great road movie, possibly a comedy, definitely an epic, in which one man triumphs against seemingly insurmountable odds to get the lathe of his dreams from Liverpool to his workshop in London. He did succeed though and there's a great set of pics on his website (www.tedjamesdesign.com) of the lathe and his other machines in action making the prototype hubs for the 29gnar a thing of raw beauty and power. So powerful, indeed, that we somehow failed to get a pic of the whole thing - mesmerised as we were by the Alfine hub gear mounted above the bottom bracket.

As the 29gnar shows, Ted isn't just about fixed gear bikes. The other bike on his stand that really caught our eye also made that point. The step-through mixte frame (that's it up top) was a genteel contrast to the 29gnar. This was one of our favourites of the many mixte-framed bikes at the show. We particlularly like the really neat mudguard mounts: the struts are held in place inside the frame by tiny grub screws. Neat.

Brian Rourke

From a new player on the British frame building scene to one of it's acknowledged masters, Brian Rourke has been building top-end performance road and mountain bikes for years and his bikes have been ridden and raced by countless pros, champions, and even legends of the sport. Rourke builds in steel and usually fillet brazes or TIG welds his frames… or indeed uses a combination of the two.

All the bikes on his stand were worth drooling over, each one a bespoke build. However the big crowd pleaser on the Rourke stand was a mean-looking race frame in over-size 953. The dark modern paint job made it look almost like carbon at first glance but the bare seat stays told a different story. The frame was also sporting new SRAM Red components.

Mind you, our eye was also drawn to the fetching looking pale blue Audax bike next to it - also made from over-size 953 stainless tubing. Brian Rourke builds in a variety of mainly Reynolds tubesets including over-sized and super-oversized 853 and 631 - he also offers a Dedacciai HTS Zero build. All his frames feature his trademark wraparound seatstays – which Rourke reckons adds stiffness and strength to the back end - 5000 frames and no failures is a testament to that, says the man himself. They certainly look good too. Basically, the two stays are scalloped out to wrap around the seat tube and then joined at the top. So neat is the join that on one of the frames on display the wraparound bit of the 931 stainless stays was unpainted… oh, and that was their first 931 frame too.

Donhou Bicycles

Last year Tom Donhou walked off with the Best in Show award. This year he didn't win any prizes but the collection of bikes he had to show were even more impressive than last year's batch. He easily had three of our favourite bikes of the show, two of them road bikes. Max was smitten by Roger's road bike, a stunning frame made from a combination of Reynolds 853 and their new 931 stainless tubeset - which made up the rear triangle (check the way the seat stays plug in to the seat tube) and that bilaminate lugged head tube?

Bilaminate? It's a method of joining the tubes that combines both a lug and fillet brazing for both pleasing visual effect and to add strength too. On this bike the head tube lug acts as a sleeve for the 931 head tube within. It's certainly a striking effect and we'd guess the the combination of oversize 853 and 931 makes for a very strong and stiff front end.

Rapha Continental UK (the bikes)

Rapha launched the UK edition of their Rapha Continental rides at Bespoked and showcased some of the British framebuilders who will be contributing bikes to the project includinding both Tom Donhou and Brian Rourke. Ricky Feather's Rapha Continental bike - which will be piloted by Max Leonard of this parish - won the prize for best road bike, while the other bike on show, which we've unaccountably got no pictures of, was by Robin Mather, the man who took both the best in show prize and the people's choice (Tom Donhou was second in that). Dave Yates and Condor are building the other two Continental bikes.

Rapha's Continental makes it to home shores after launching five years ago in the US. The basic idea is that it's all about big rides that aren't races. They may not be competitive but Continental rides are not about touring, the press release announcing the UK launch makes that clear right from the off. To be fair, as one of the chaps from Rapha explained, there wouldn't be much point calling the UK rides tours when the riders will have a support car and be staying in some nice hotels en route. In fact, the UK Continental rides are less about epicness - although there will certainly be some hard riding - and more about celebrating the diversity of landscape, artists, and craftsmanship the UK has to offer.

The Continental bikes certainly pay homage to that. Very different they are too. The Brian Rourke is made from TIG welded Reynolds 853 with all the welds silver soldered too. Whoever is riding it must be a big fella cos it's huge - we reckon a 62 at least. Oversized 853 might not be the fanciest tubeset ever but it should help stiffen up those big triangles. One of the big advantages of TIGing the welds too is that it doesn't use too much heat so won't affect the heat treatment of the tubes around the joint - of extra importance on a bike that's going to be ridden over rough terrain by a big rider.

The Donhou Continental bike was one of my favourite bikes at the show - probably because it's a fancier version of the build on my own bike. It's a lugged Reynolds 853 steel frame so should give a stiffish and strong ride, which is what was wanted by its pilot Sam Humpheson, who's also the wheel builder for the project. The Donhou also comes with disc brakes and a very natty wound up carbon cyclocross fork with added fender mounts.

Those aren't any old discs either. The Donhou runs a set of new cable-operated Hayes Mechanical discs. Sourced by Humpheson, they certainly look good but Tom Donhou didn't have any idea what they stopped like. Donhou himself specs Avid BB7s on his disc-equipped bikes and they are easily the best mechanical discs for road bikes currently on the market . They confer a performance advantage over traditional rim brakes which isn't something you can say about all mechanical discs. Mind you, that Hayes rotor certainly is pretty.

The first Rapha Continental Ride is scheduled for the end of this month across Scotland. While we'll be putting the last of our Bespoked galleries up this week with some cool urban, utility and touring bikes.

road.cc's founder and first editor, nowadays to be found riding a spreadsheet. Tony's journey in cycling media started in 1997 as production editor and then deputy editor of Total Bike, acting editor of Total Mountain Bike and then seven years as editor of Cycling Plus. He launched his first cycling website - the Cycling Plus Forum at the turn of the century. In 2006 he left C+ to head up the launch team for Bike Radar which he edited until 2008, when he co-launched the multi-award winning road.cc - finally handing on the reins in 2021 to Jack Sexty. His favourite ride is his ‘commute’ - which he does most days inc weekends and he’s been cycle-commuting since 1994. His favourite bikes are titanium and have disc brakes, though he'd like to own a carbon bike one day.

Add new comment

15 comments

Avatar
_SiD_ | 12 years ago
0 likes

The black and red Rourke and the orange Donhou were the best bikes I saw as well.

The best wallets were the Velo:re's with puncture patch and blue lining! All my budget could stretch to. Always next year!

Avatar
Tony Farrelly | 12 years ago
0 likes

We should have, shouldn't we? Would have been one of the few bikes there not wearing Contis.

Coincidentally some Onza Predas have just come in for test.

…you mean test 'Roger's road bike' we'd almost be too scared. We'll try to man up and drop you a line

Avatar
Raging Roger | 12 years ago
0 likes

Did none of you chiefs from road.cc notice the Onza tyres on that peach of a Donhou? You can road test it if you promise to return it in sparkling condition and only ride it in the perfectly dry. Email me.

Avatar
jezzzer | 12 years ago
0 likes

there was this glorious renovated holdsworth on the argos stand - that's an £800 paint job, kids...

http://www.argoscycles.com/gallery.htm

Avatar
joemmo | 12 years ago
0 likes

really like the look of that Donhou although the under bottom bracket brake cable routing could be a bit troublesome, even if it does keep the top tube and seat stays clean looking and cable free.

Avatar
Tony Farrelly | 12 years ago
0 likes

Hi Fringe I think in layman's terms (which would be mine) the difference is that 931 gives more of a steel ride. I stand to be corrected, but I'm sure one of the builders told me that Reynolds had introduced it to answer the - whisper it - criticism that 953 while lovely and shiny was also a little… er, stiff.

Avatar
Max_Leonard replied to Tony Farrelly | 12 years ago
0 likes
tony_farrelly wrote:

Hi Fringe I think in layman's terms (which would be mine) the difference is that 931 gives more of a steel ride. I stand to be corrected, but I'm sure one of the builders told me that Reynolds had introduced it to answer the - whisper it - criticism that 953 while lovely and shiny was also a little… er, stiff.

It's also cheaper and easy produce, I think, and heavier - therefore extending the reach of stainless down the product range. I think of it as the Ultegra to the Dura-Ace Di2.

@ Fringe. Thanks! Though I fear it won't be quite that genteel!

Avatar
fizzydroadie | 12 years ago
0 likes

That disc rotor is from Hope ... beautiful and British  26

Avatar
Vin Cox replied to fizzydroadie | 12 years ago
0 likes
fizzydroadie wrote:

That disc rotor is from Hope ... beautiful and British  26

I was about to point that out too. Hayes disks aren't so pretty.

Avatar
Fringe | 12 years ago
0 likes

i'm quite jealous of Mr. Leonard, he gets to ride a fantastic looking bike and doesn't have to sully its looks with an ugly saddle bag etc as someone will be driving behind him with spare tubes, hot drinks and snacks etc..nice. good luck to you sir.

also does anyone one know the difference between Reynolds 931 and 953?, i did look on their website but i'm no engineer and it couldn't make much of it. ta.

Avatar
Benjamin Hall | 12 years ago
0 likes

That black and red rourke was the best bike at the show. Hands down!

Avatar
thereandbackagain | 12 years ago
0 likes

The Donhou bikes are on display in the London bike cafe/bar Look Mum No Hands, for anyone who missed the show and lives/works near the Old Street area.

Avatar
Tony Farrelly replied to thereandbackagain | 12 years ago
0 likes
thereandbackagain wrote:

The Donhou bikes are on display in the London bike cafe/bar Look Mum No Hands, for anyone who missed the show and lives/works near the Old Street area.

Ooh thanks for mentioning that thereandbackagain - I meant to put something in the story about that too

Avatar
chrisb87 | 12 years ago
0 likes

no mention of the stunning red Villiers Randonneur that was there, shame....

Avatar
Tony Farrelly replied to chrisb87 | 12 years ago
0 likes

Sadly I didn't get a shot

Latest Comments