Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Muc-Off enters the tubeless market with new No Puncture Hassle Tubeless Sealant Kit

But is it pink?

Muc-Off, the company best known for its extensive range of cleaning products, has decided to enter the tubeless sealant market with the launch today of its No Puncture Hassle Tubeless Sealant Kit. Who saw that one coming?

- What are the pros and cons of tubeless tyres?

Tubeless wheels and tyres are growing in popularity, with more choice and greater understanding of the benefits and the practical side of installing tubeless tyres. A key component of a tubeless setup is the sealant which replaces the inner tube and in many cases can seal small holes caused by flint, glass or thorns that manage to slice through the tyre. This puncture prevention is the biggest appeal of a tubeless setup.

Muc-Off makes some impressive claims for its new No Puncture Hassle Tubeless Sealant Kit. It boldly tells us it has used “cutting-edge microfibre molecules” that are able to fill large holes in the tyre, up to 6mm in size. It ’s biodegradable, non-corrosive and easy to wash off with warm water.

muc-off_no_puncture_hassle_tubeless_sealant_pouch_2.jpg

It also claims the sealant lasts six months before it needs topping up, it won’t dry out or ball up and is compatible with CO2 canisters.

The British company says it has developed the new sealant in collaboration with some of the world’s top downhill and pro-peloton and it’s compatible with tubeless-ready and UST wheels and tyres.

Installation is said to be easy, the 140ml pouch is designed to fit straight onto Presta valves (with the valve cores removed) to avoid making a mess. You can also pour it straight into the tyre before you fit the tyre to the rim.

Muc-Off has also developed a rather novel UV detection system that can highlight punctures in the tyre that the cyclist might not have spotted.

“We have tested ‘No Puncture Hassle’ under the most brutal conditions on the planet with 3 years of deep R&D using a wide group of our pro athletes from around the world. The formula we finally created is a result of 100s of hours of testing, the results of which have taken tyre sealant performance to a new level,” explained Alex Trimnell, Muc-Off Managing Director.

muc-off_no_puncture_hassle_tubeless_sealant_kit_1.jpg

“The feedback we’ve had from our professional riders has been awesome! We are really excited to have created one formula which works to the highest performance in all tubeless tyres, from Pro Road Racing to World Cup Downhill and everything in between. Oh and lastly, we really don’t like single-use plastics so would encourage all to use our 1-litre refill to fill up the pouches.”

A 140ml kit costs £9.99 with 1-litre refill £29.99 and a 5-litre workshop kit costing £120.

Check it out at https://muc-off.com

Here's a video showing how to install the tubeless sealant:

David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Add new comment

6 comments

Avatar
janusz0 | 6 years ago
0 likes

I have dreadful memories of the consequences of sealants injected into tubed tyres.  (Fine until you get a catastrophic puncture and attempt to get the tyre and rim clean for a new tube.)

How is it that tubeless car and motor cycle tyres can maintain a seal with modest pressures, but more supple bicycle tyres can't?  Why is it not possible to add a softer rubber compound to the bead or engineer  'O' ring seals into the rim?  Given the astonishing puncture resistance of today's tubed bicycle tyres, I see very little reason to use sealant at all.

 

Avatar
Ronald replied to janusz0 | 6 years ago
0 likes
janusz0 wrote:

How is it that tubeless car and motor cycle tyres can maintain a seal with modest pressures, but more supple bicycle tyres can't?  Why is it not possible to add a softer rubber compound to the bead or engineer  'O' ring seals into the rim?  Given the astonishing puncture resistance of today's tubed bicycle tyres, I see very little reason to use sealant at all.

 

My guess would be: We like to have a tyre that weighs very little (but may puncture quite a bit more easily than a car tyre), and doesn't need a machine, grease and crowbar to fit on the rim  3

Avatar
mike the bike | 6 years ago
0 likes

 

Good job I took a second look, at first glance I thought it was an energy gel.  Now that could be a  mistake with consequences.

Avatar
StraelGuy replied to mike the bike | 6 years ago
0 likes

mike the bike wrote:

 

Good job I took a second look, at first glance I thought it was an energy gel.  Now that could be a  mistake with consequences.

 

Ha, ha, yes. You'd be the first ever 'whatever the opposite of a haemophiliac is' person .

Avatar
Leviathan | 6 years ago
0 likes

Looks tasty.

Avatar
iso2000 | 6 years ago
0 likes

Looks OK. Finish Line have a sealant that they claim will never dry out:

https://bikerumor.com/2018/02/12/new-finish-line-tubeless-tire-sealant-will-never-dry-out/

 

Latest Comments