Support road.cc

Like this site? Help us to make it better.

What is the angle of this stem!!!!!!!!

Trying to find out what angle the stem is???

It's a specialzed S works FACT 110mm Carbon stem

Cheers Team

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

9 comments

Avatar
Royal1664 | 9 years ago
0 likes

Thanks for everyone's help and also for 5-O's great find!

Avatar
RR | 9 years ago
0 likes

10 degrees. This site still has the specs: http://www.togoparts.com/items/view_item.php?iid=19734

Avatar
fukawitribe replied to RR | 9 years ago
0 likes
5-O wrote:

10 degrees. This site still has the specs: http://www.togoparts.com/items/view_item.php?iid=19734

Nice find.

Avatar
Jimmy Ray Will | 9 years ago
0 likes

I'd say it was upside down and is a 72 degree stem... so basically horizontal when on the bike.

Avatar
Royal1664 | 9 years ago
0 likes

The photo with the side profile is slightly off so it came in around 17 deg so I think 6 is about right.

Cheers again!!

Avatar
Royal1664 | 9 years ago
0 likes

Cracking idea!!! I'll post up my findings

Avatar
fukawitribe | 9 years ago
0 likes

As a guesstimate - print out, draw a line from the middle of bar clamp to the (vertical and horizontal) centre of the steerer clamp, draw another along the flat bit of the bottom of steer clamp and bung a protractor on the bit where they meet. AFAIK the smaller angle S-Works stems were 4 or 6 degrees (two different types) so the nearest to either one of those is probably about right. My moneys still on 6 I reckon.

Avatar
Royal1664 | 9 years ago
0 likes

I don't own it!!! Seen one for sale and have tried messaging the seller but no joy! Google is drawing blanks as well.

Thanks for the help.

Avatar
fukawitribe | 9 years ago
0 likes

Ummm - have you tried, you know, actually measuring it ? Looks about 6 degrees, Google may help here - or a protractor....

Latest Comments