Support road.cc

Like this site? Help us to make it better.

forum
road.cc bike forum

Garmin trouble!

by HarryTrauts
Sun, Oct 18, 2015 15:34
3

I updated the software for my Garmin 510 this morning and now it won't bloody work!  It turns on and says it's installing profiles and then turns off.  This lasts about 15 seconds.

I've looked at the manual and the Garmin site but nothing I've tried - re-set, etc - makes any difference.  And, yes, it's fully charged.

Any thoughts?

Thanks in advance.

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

3 comments

Avatar
wellcoordinated | 9 years ago
1 like

Usually you can hold down some buttons and then it will do a reset and the everthing will work again. I don't have a 510, but on the 1000 you hold all three buttons down for about 10 secs and then it work.

Avatar
HarryTrauts replied to wellcoordinated | 9 years ago
1 like

wellcoordinated wrote:

Usually you can hold down some buttons and then it will do a reset and the everthing will work again. I don't have a 510, but on the 1000 you hold all three buttons down for about 10 secs and then it work.

 

Thanks for the replies.  I've now done a proper reset - holding down all three buttons then just two - and it works!  I have to re-calibrate all the sensors, but at least things are working again.

Avatar
DaveE128 | 9 years ago
0 likes

Bummer 2 Sounds like one for Garmin support. They do usually get back to you in a reasonable time in my experience.

Latest Comments