Support road.cc

Like this site? Help us to make it better.

OPINION

Winter Project - Part 3 - Pausing, Stopping And Going.

Avatar
VecchioJo gets his Winter Project back on track

 

There’s been a bit of a stutter with the project, just like all projects seem to suffer, shuffling all the parts together, waiting a bit, getting distracted by other stuff, but the hiemal grip is still tight and cold and dark so it’s still officially a Winter Project, and there’s still a lot of time to be spent hiding in the shed for while. “Strictly…” may be over, thank God, but “Come Dine With Me” seems to be on constantly, Lord save me.

The eagle-eyed amongst you will have noticed the CXD fork has changed colour, Dom from Kinesis shared my colour-matching awkwardness with the black and the blue of the original fork sitting awkwardly against the red bits of the wheels and found a spare white one kicking around to ease my artistic whiney angst. With its subtle red detailing it’s much much better already. And 2mph faster.

As well as supplying turning duties with their headset Hope are taking care of the stopping with their X2 disc brakes with V-Twin converter. Discs on ‘cross bikes, and road bikes for that matter, are the hot topic right now and the battle of the big boys to be first to the bar with an integrated hydraulic road disc brake system has been won by SRAM with their version breaking cover late last year. But it looks like it might be a while before we can actually get our hands on SRAM’s offering so I’ll have to make do with the Hope V-Twin under the stem cable-to-hydraulic converter. Although saying “make do” is doing it a massive disservice, it’s helped win more than enough cross races over the last season or two including this year’s somewhat testing Three Peaks and it also means I’m not manacled to the SRAM gearing system and can use something else, which in this case is Shimano, who’s shifting I prefer to be honest. So that’s good.

Which leads nicely to the Going choice. Obviously it would be nice to bolt Dura-Ace Di2 on there to make the build all bling but these are tough times and 105 is more than just fine. It’s only going to get muddy after all and if I squint a bit I can convince myself that the black of the 105 groupset goes better with the black/white colour scheme of the Litespeed than the blue-grey or silvery sheen of Shimano’s higher end groupsets. Yeah. The chainset is Shimano’s CX specific CX50 with 175mm cranks and a 46/36 chainring combination so there’s no need to put up with an awkward too big or too small compact road gearing arrangement or faff about changing rings to suit. Matched to a 12-27 at the back it should see my legs up pretty much anything. There’s a KMC chain on there, well, because I like KMC chains and they have that split link which makes taking off and cleaning after yet another gritty ride a simple task whilst the tea’s brewing.

Only the sitting and holding bits to get now, and find a pretty way to route that rear brake hose, nearly there, just in time for the tail-end of Winter. Oh.

www.kinesisbikes.co.uk

www.hopetech.com

www.madison.co.uk

Jo Burt has spent the majority of his life riding bikes, drawing bikes and writing about bikes. When he's not scribbling pictures for the whole gamut of cycling media he writes words about them for road.cc and when he's not doing either of those he's pedaling. Then in whatever spare minutes there are in between he's agonizing over getting his socks, cycling cap and bar-tape to coordinate just so. And is quietly disappointed that yours don't He rides and races road bikes a bit, cyclo-cross bikes a lot and mountainbikes a fair bit too. Would rather be up a mountain.

Add new comment

5 comments

Avatar
minnellium | 11 years ago
0 likes

I've just fitted a V Twin to my Planet X Ti 'Cross bike (Prototype..!) - a word of warning: Especially if you elect to use bar-top brakes, there is VERY little spring-tension in the pistons - and most road levers are designed to expect brake spring tension.

The result is that you are very likely to get a slack return on the brakes. Buy the best possible outers, cut them to perfection, ferrule them with all the care you can give, and get the cleanest cable lines in all of god's creation, or you will feel your levers wobble and jiggle no matter what you do. Hydraulics don't 'return' cables very well.

They stop brilliantly though  1

Avatar
PATMAC | 11 years ago
0 likes

''I have never found a chain better than Shimano.''..no dis intended.. do you actually work with or at bikes or own just one?? i'm an experienced tech.. shimano chains in the past few years last about 1500 miles of hard going, their cheaper cassettes are similarly poor.. they have cut the quality and upped the price..10sp ..kmc or campag will do much longer..

Avatar
VecchioJo | 11 years ago
0 likes

i stopped using Shimano chains the moment some time last century they introduced their system of using connector pins to rejoin the chain, i know it makes sense to keep a chain strong but it's a PITA if you want to take your chain off frequently to clean it, like what i do

back then split-links weren't as common as they are now, so it's a petulant hangover from that really, and i've never had a issue with KMC chains

Avatar
Bryin | 11 years ago
0 likes

Why a KMC chain? You can use the KMC link on Shimano chains and I have never found a chain better than Shimano. Something that Tour magazine found out in their tech test.

Avatar
Gkam84 | 11 years ago
0 likes

Is there no way to run the brake hose on the down tube and along chain stays. I just don't know how it would pop back up to the brake?

Looks like a great set up though

Latest Comments