Scott cr1 owners- headset Q?

Leigh2612 wrote:

I know it's a pain isn't it...

Here you go: http://www.chainreactioncycles.com/Mobile/MobileModels.aspx?ModelID=90541

Thank Leigh! Made my day (and anyone else's whose Googling brings them to this page )

Leigh2612 wrote:

Hi guys,
Fitted mine no issues. I got a ritchey sealed bearing unit but wish I had seen the cane creeks before... I had a 40 on my MTB which was super smooth.

I don't suppose you have a link to the Ritchey unit you bought? When I look on sites such as Wiggle, I see lots of different sizes even for semi-integrated pressfit 1 1/8 (OD 40mm, or OD 50mm, and some have additional sizing such as OD 50mm x 12.4) so its a minefield trying to determine the exact make model and size. If you have that to hand it would be helpful (I asked a local scott dealer and he couldn't tell me the exact information either and is checking with Scott but so far no reply).

SPAM Naval wrote:

i've a Scott Cr1 Pro (2010)and using the Cane Creek website I found the following headset which is consistent with your feedback from Scott. I've bought it from Wiggle but havn't fitted it yet!

http://www.wiggle.co.uk/cane-creek-40-series-zerostack-1-18-inch-headset/

Have you or Leigh fitted the headset successfully yet? That would be the final confidence inspiring test that you've got the correct part - then the rest of us can go a purchase the same

If you would be so kind as to post back here once you have done so, that would be great.

i've a Scott Cr1 Pro (2010)and using the Cane Creek website I found the following headset which is consistent with your feedback from Scott. I've bought it from Wiggle but havn't fitted it yet!

Your link leads to two sizes - short and tall. Which did you choose and how did you make that decision?